|
chiefs
hat
flat
screen
bed frame
Scooter
Cover
cufflinks
cubs mesh hat 1
2
AMP
Mag Subscription
order
Unwritten Law shirt
chidiggit shirt 15$
- paypal info
http://www.interpunk.com/item.cfm?Item=87720&
http://www.drivethrurecords.com/store/view.asp?id=466
broadways
shirt on here
http://www.interpunk.com/item.cfm?Item=96784&
http://www.cafepress.com/alm30_13.19005328
http://www.cafepress.com/alm30_5.16625469
http://www.cafepress.com/alm30_7.16519201
http://www.cafepress.com/alm30_13.19005328
http://www.cafepress.com/alm30_8.16521378
http://www.cafepress.com/alm30_9.16572777
http://www.cafepress.com/alm30_10.16608975
http://www.cafepress.com/alm30_11.16716074
http://www.cafepress.com/alm30_6.16508131
http://www.cafepress.com/alm30_12.18746706
NOTE BACK ON HERE -- http://www.cafepress.com/alm30_5.16625469
ebay DOUBLE SIDED CUFFLINKS
order
nomar shirt from drunkenbleachers.com
http://www.drunkenbleachers.com/nomah.htm
buy some hoya de montereys
MXPX
http://stores.musictoday.com/storband%d=2
http://stores.musictoday.com/st=2
http://stores.musictoday.com/sto&sfid=2
http://stores.musictoday.com/store/proid=2
http://stores.musictoday.com/stord=2
punk tshirts
http://www.interpunk.com/item.cfm?Item=73371&
http://www.interpunk.com/item.cfm?Item=100153&
http://www.jettisonmusic.com/t-shirts.htm
http://www.interpunk.com/item.cfm?Item=22105&
http://www.smokingpopes.net/duvall/shopfeatured.htm
http://www.interpunk.com/item.cfm?Item=106674
http://www.interpunk.com/item.cfm?Item=83561
http://www.interpunk.com/item.cfm?Item=43189
black frame for living room art
nice
undershirts
4700)3" Polished Chrome Wire Pull
Brand: Liberty
SKU #806283
1
2
gonna need like 32 of them
bed
can i buy just new queen frame bed cause at carsons nice frame was 800
queen and over 1000 for king
cd
player or this
one (cheaper)
can you plug into outlet? can you plug cd player into them?
15.50
15.50
14.87
Epson Stylus CX6600 Multifunction Printer
cartridges
high capacity is 34$ - TO43120
low capacity is 25$ - TO44120
http://www.shopping.com/xPC-Epson_EPSON__21167878
http://www.shopsmartxpress.com/AmeriGls/MAIN.htm
TOTAL $102.73
7/32 1.5 mil Copper Foil #FL-123 $ 3.79
60/40 Solder, 1 lb roll #SP-101 $ 4.95
Inland 100w Soldering Iron #TL-202 $ 23.75
Standard Cutting Oil #SP-902 $ 2.89
Toyo Acrylic Supper Cutter #TL-111 $ 22.95
Waterglass Glass Pack #PK-321 $ 34.95
========================
use copper foil on the glass and soder from there with 70% iron soder
Hi Z,
Based on the classes I took and the opinions I've formed - it depends
on
what you are trying to create. There are two methods: copper foil and
lead.
Copper foil: Cut pieces, grind, wrap in copper foil, flux, solder
together,
and clean.
If you are creating something that involves small/intricate pieces I'd
recommend the copper foil method. Typically the solder is 60%/40% or
50%/50% (I don't know about 70%/30%). Solder is actually a lead/tin
mixture
not iron. This method is used for Tiffany lamps, suncatcher, etc.
Lead: Cut glass, grind if needed, trim with lead, flux, solder
together,
putty (let dry for a week), use whiting to clean and remove extra
putty,
brush to shine.
If you are going to make a window or something that you want to have
very
crisp solder lines/curves I'd recommend lead (i.e. like what you see in
churches, front doors, etc). I think Lead gives a cleaner finished
product
but it is not good for tight curves or smaller pieces like Tiffany
lamps
because you would need to cut each piece if lead individually and
solder
together [I know I'm not explaining this part well, sorry). Also, it
has a
few more steps than copper foil.
I think it is beneficial to learn both methods if you are serious about
it.
I think a copper foil followed by a lead class is the way to go. Lead
needs
a few extra tools that copper foil doesn't but all of your tools from
copper
foil can be used for lead. Copper foil is also cheaper to make mistakes
while you are learning to solder.
Either of the two classes required me buying my own tools. The copper
foil
class I took through the Parks and Rec department and the lead class I
took
through a stained glass shop. I am currently taking a third class on
Window
Making as it requires learning about exact measurements, reinforcement,
etc.
Hope this helps. Let me know if you have any more questions.
:) Jen
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, May 12, 2003 1:18 PM
To: 'DeNicholas, Jennifer'
Subject: RE:
howdy
can you give me lowdown on stained glass? i talked to this girl this
weekend that told me the easiest way to do it would be
use copper foil on the glass and soder from there with 70% iron soder
DeNicholas Joseph
[email protected]
DeNicholas, Jennifer [email protected]
http://www.shopsmartxpress.com/AmeriGls/MAIN.htm
Sub Total: $ 70.60
no shipping
Shopping Cart Contents:
Item Description Quantity Each Total
Spectrum Variety Glass Pack #PK-300
$ 36.95 $ 36.95
Inland 100w Soldering Iron #TL-202
$ 23.75 $ 23.75
60/40 Solder, 1 lb roll #SP-101
$ 4.95 $ 9.90
Sub Total: $ 70.60
Sales tax: (5.50% = $ 3.88)
Check here if you`re a resident of
Nebraska.
Shipping: Select shipping destination:
USA - Standard Delivery - $ 8.60USA - AK HI PR VI (estimate only) - $
8.60USA - APO/FPO (estimate only) - $ 8.60
http://www.greywing.com/glass/glassht.htm#cut
|